The AT bus, which runs at 8 megahertz and has a 16-bit data path, is the de facto standard for PCs. Because all IBM PCs (until the high-end PS/2 models) had an AT bus, it has been possible for manufacturers to produce expansion boards that will work with any PC.

The AT bus is sometimes referred to as the ISA bus, which stands for Industry Standard Architecture. However, ISA also includes the XT bus, which is an 8-bit version of the AT bus.

As processors have become more powerful, and applications more demanding, the AT bus has turned out to be the chief bottleneck in PCs. In response, IBM introduced the Micro Channel Architecture (MCA) in 1987. However, MCA was not accepted by the computer industry because it was not backward compatible with the AT-bus, so IBM has been forced to drop it.

A more successful alternative to the AT bus is the Extended Industry Standard Architecture (EISA ), a high-speed 32-bit bus architecture developed by a group of IBM's competitors. Unlike MCA, EISA is backward compatible with the AT bus, so a computer equipped with an EISA bus can accept AT or EISA expansion boards.

While EISA has had limited success, its speeds are still insufficient for modern graphical applications. The most common solution to bypassing the AT-bus bottleneck is to include a local bus on the motherboard. A local bus communicates directly with the processor rather than using the standard computer bus. Currently, there are two competing standards for local buses: VESA local bus (VL-bus), promoted by the VESA standards group, and Peripheral Component Interconnect (PCI), designed and promoted by Intel.

See also "Understanding PC Buses" in the Did You Know...? section of Webopedia.

Microprocessor Comparison Chart
A cut-to-the-chase guide that compares and contrasts popular processing chips.

SysOpt
A system optimization community. News and forums for technology professionals who are obsessed with achieving maximum performance.

Webopedia: How to Clean Common Computer Parts and Devices
From dusty computer fans to fingerprints on compact discs, computer parts and devices can get awfully dirty from normal everyday use or when left sitting unused. The best way to have any computer component cleaned is to have it professionally serviced, but if you no longer have a service warranty, or if you picked up a second-hand item and want to clean it to see if it even works, here are some tips on how to clean some common items.

Webopedia's Quick Reference Section
Use this Webopedia reference section for information on common Internet and computer facts and occurrences.

What You Need to Know About Motherboards
You can think of the motherboard as a communications center. The purpose of the motherboard is to provide the means for all the other components and peripherals to talk to each other.